Matek Systems PDB-XPW w/ Current Sensor 140A & Dual BEC pdb quadcopter distribution board drone flight controller

[gallery]
Features:
2oz coppter, 4-layers andamp; 2mm PCB
Built-in current sensor 140A
Built-in XT60PW Socker
Total 4 pairs ESC solder tabs are fit for X type frame
5V andamp; 12V Output LED indicators andamp; Short circit tolerant


Specifiations:
General:
-- Input voltage range( 3S-5S Lipo operation): 9-21V DC
-- PDB: 4 X 35A
-- Regulated 5V and 12V outputs
-- Current module 140A
-- LED power indicators ( 5V andamp; 12V outputs )

Current Module
-- 140A
-- 3.3V ADC

BEC 5V output:
-- Designed for RC Receivers, Flight controller, OSD, and Servors.
-- DC/DC synchronous buck regulator
-- Voltage: 5.0 +/- 0.1VDC
-- Continuous current: 2 Amps (Max. 2.5A 10s/minute)
-- Output Ripple: 40mV(VIn=16V, Vout=5V2A load )
-- Short-circuit tolerant (5 seconds/minute )

BEC 12V output:
-- Designed for Video TX or FPV camera with linear regulator
-- The battery should be 4-5S Lipo (13-21V DC)
-- Voltage: 12.0 +/- 0.3V DC
-- Continous current: 500mA ( Max 0.8A 5s/minute)
-- Short-circuit tolerant ( 2 seconds/minute)

BEC 12V3S LiPo
-- Output voltage=3S Lipo voltage - 1V

Physical:
-- Mounting: 30.5*30.5mm
-- Dimensions: 36*50*4mm(W/o XT60PW),36*58*10.5mm(w/ XT60PW)
-- Weight: 7.0g(W/o XT60PW),11g(w/ XT60PW)

--------------------------------------------------------
Package Including
1 * PDB XT60 Powe Distribution Board Dual BEC 5V/2A 12V/0.5A Build-in 140A Current Sensor
1 * Crazepony Strap
The PDB-XPW distributes power from a LiPo Pack to 4 ESCs, as well as providing synchronised Regulated DC 5V out puts linear regulated DC 12V for powering cameras, RC receiver,Flight Controller, Video Transmitters, LEDs, etc.
Features ------ Built-in current sensor 140A. Built-in XT60PW Socker. Total 4 pairs ESC solder tabs are fit for X type frame. 5V 12V Output LED indicators Short circit tolerant. 2oz coppter, 4-layers 2mm PCB.
Dual BEC output ------ BEC 5V output: 5.0 +/- 0.1VDC Voltage,Continuous current: 2 Amps (Max. 2.5A 10s/minute) BEC 12V output: Voltage: 12.0 +/- 0.3V DC, Continous current: 500mA ( Max 0.8A 5s/minute).
Specially design for X Type Drone ------ with a XT60PW socket, it is convenient to connect the Lipo pack for X Type drone frame, such as QAV X X250 X220 X210 X180 Drone Frame, and so on.
With A Crazepony Strap, meeting your need for fixing your battery or others
[amz_corss_sell asin="B06XCX23Q1"]